Yakima Valley

PHOTOS > Central WA Antique Farm Equipment Club: 2024 Harrah Tractor Run

2024 Harrah Tractor Run
Hosted by Central Washington Antique Farm Equipment Club

Report & photos by Clay Graham / CegPics.com

Around 8:30 AM on Saturday September 14th 2024, the Central Washington Antique Farm Equipment Club convoyed from the Fullbright Park in Union Gap to Harrah and joined their parade. There were eight tractors driven in the convoy with Doc, CJ, and I following in the Chevy 1500 as the support vehicle.

Once we got to Harrah in the parade staging area, two more tractors joined us. They had us line up behind a Ground Hog tractor to group the tractors all together with Doc driving the support vehicle behind the tractors.  Pulling out in the parade we had to jump start the 8N caboose tractor and then pull start another. Some others got mixed up in our line. Once downtown, I jumped out of the truck to take photos and video. Almost in front of the parade announcer, Kent’s Ford Jubilee had transmission problems and had to be tow the rest of the parade. The Announcer made fun of the Ford being pull by a John Deere. At the end of the parade we went to lunch.

After lunch we headed back to Fullbright Park. Kent rode in the people wagon back to get his truck and trailer to get his tractor home.

This was a fun time thanks to all who came.

Here are some photos of our trip:

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Rune

Harrah Tractor Rune

Harrah Tractor Rune

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

Harrah Tractor Run

PHOTOS > Central WA Antique Farm Equipment Club: 2024 Harrah Tractor Run Read More »

PHOTOS > CWAFEC: Fairbanks-Morse 35E10 Engine Crank Bearings

Central Washington Antique Farm Equipment Club:
Fairbanks-Morse 35E10 Engine Crank Bearings

By Clay Graham / CegPics.com

On Tuesday August 20th, 2024, CWAFEC members met up at Timpke Machine & Welding to see Bill Allen progress on the Fairbanks-Morse 35E10 Engine Crank. The crank has been turned and Bill is now working on the bearings. He has some of them done.

Doc and I picked up the repaired Small People Wagon axle and tongue from Kent. These parts will be painted and put back on this week.

Here are some photos:

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

PHOTOS > CWAFEC: Fairbanks-Morse 35E10 Engine Crank Bearings Read More »

PHOTOS > CWAFEC: Fairbanks-Morse 35E10 Engine Crank on J.J. McCabe Lathe

Central Washington Antique Farm Equipment Club:
Fairbanks-Morse 35E10 Engine Crank on J.J. McCabe Lathe

By Clay Graham / CegPics.com

On Tuesday August 6th, 2024, CWAFEC members met up at Timpke Machine & Welding to see Bill Allen use the J.J. McCabe Lathe to work on the Fairbanks-Morse 35E10 Engine Crank. Doc and I dropped off the bent parts of the Small People Wagon to Bill to work on.

Here are some photos:

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

Central Washington Antique Farm Equipment Club

PHOTOS > CWAFEC: Fairbanks-Morse 35E10 Engine Crank on J.J. McCabe Lathe Read More »

PHOTOS > CWAFEC: People Wagon Axle Removal

Central Washington Antique Farm Equipment Club
People Wagon Axle Removal

Report & photos by Clay Graham / CegPics.com

Monday August 5 2024, Doc Graham, Charlie Graham, and I worked on removing the Central Washington Antique Farm Equipment Club Small People Wagon front axle for repairs. The axle tube is bent in a few different directions and the hitch tongue is bent too. We delivered the bent parts to Bill Allen on Tuesday August 6, 2024. Once we get the parts back, we will put them on and then lube the bearings.

We will still be working on the small people wagon tightening loose bolts and replacing some if needed. Charlie’s wife Hailey will be working on painting the Central Washington Antique Farm Equipment Club logo on each side of the wagon.

Here are some photos:

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

Central WA Antique Farm Equipment Club

PHOTOS > CWAFEC: People Wagon Axle Removal Read More »

PHOTOS > Central WA Antique Farm Equipment Club: 2024 Toppenish Wild West Parade

Central Washington Antique Farm Equipment Club
2024 Toppenish Wild West Parade

By Clay Graham / CegPics.com

On Saturday July 6th, 2024, Central Washington Antique Farm Equipment Club members meet up at the Toppenish Rodeo Grounds to be in the Wild West Parade. The club had ten tractors and the small people wagon entered. The parade only took an hour or so and it was a lot of fun.

Here are some photos:

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

Toppenish Wild West Parade

PHOTOS > Central WA Antique Farm Equipment Club: 2024 Toppenish Wild West Parade Read More »

VIDEO > Central WA Antique Farm Equipment Club: 2024 Toppenish Wild West Parade

Central Washington Antique Farm Equipment Club
2024 Toppenish Wild West Parade

Location:
Toppenish, WA

Date:
July 6 2024

Taken By:
Clay Graham of Ceg-TV.com / CegPics.com

Camera:
Samsung Galaxy S23 Ultra

Edited by:
Clay Graham

Also on YouTube

VIDEO > Central WA Antique Farm Equipment Club: 2024 Toppenish Wild West Parade Read More »

VIDEO > CWAFEC: J. J. McCabe Lathe Turning a Fairbanks Morse Crank

Central WA Antique Farm Equipment Club:
J. J. McCabe Lathe Turning a Fairbanks Morse Model 35E10 Engine Crank

This is just the set up before work starts. The antique J. J. McCabe Lathe with be used to shave a crank for the antique Fairbanks Morse Model 35E10 Engine that we have been working on at the Ag Museum.

Location:
Timpke Machine & Welding, Union Gap, WA

Date:
July 2 2024

Taken By:
Bill Allen

Edited by:
Clay Graham

Also on YouTube

VIDEO > CWAFEC: J. J. McCabe Lathe Turning a Fairbanks Morse Crank Read More »

Scroll to Top